Skip to content
Plant CityConcrete CoPlant City Concrete CoDriveways · Patios · Slabs
Freshly poured broom finish concrete driveway at a single-story Florida home with a lawn near Bealsville, Plant City

Concrete contractor · Hillsborough County

Concrete Contractor in Bealsville, Plant City

Long driveways, shop and carport pads, porch walks and patios on Bealsville family land south of Plant City.

Straight Answers,
Written Quotes

Free on-site estimate
Written quote within 48 hours
Clean jobsite when we leave
Licensed & insured

Quick answer

Bealsville was homesteaded in 40 to 160 acre tracts, and Alfred Beal later resold smaller lots to residents, a pattern that kept land in local families, so a job here can mean a long driveway in from Horton Road or a pad for a second building. Plant City Concrete Co is the Plant City concrete contractor that measures it on site and prices it by the square foot, $8 to $14 for 4 to 5 inches with a broom finish.

Bealsville at a glance

Bealsville is a historic community south of Plant City around Horton Road and SR 60, settled by freed people in late 1865.

Rolling sandy loam, wells and septic fields, and long runs from county roads shape the quote here.

Permit office: Hillsborough County Development Services · official site Generally county; confirm your parcel's Tax District on the Property Appraiser site.

Homestead ground, settled in late 1865

Freed people from Hopewell, Knights, Springhead and nearby communities settled Bealsville in late 1865, and the county's historical marker says they acquired land through the 1866 Southern Homestead Act. The marker stands at Nesmith Road and Joe King Road, in front of the Bealsville Recreation Center. The community took its name in 1923 for Alfred Beal, who bought the land of neighbors who defaulted on mortgage or tax payments and sold smaller lots back to residents. The Glover School campus, listed on the National Register in 2001, became a community center after the school closed in 1980.

If your place is on a well and septic, find out before the site visit where the well, the septic tank and the drain field are, and mark any old buried lines you know of. We keep trucks and forms off a drain field and plan the route around it.

Long concrete driveway leading back to a single-story home on open land near Bealsville, Plant City
A long concrete driveway running back from the road to the house.

A long driveway in from Horton Road or SR 60

The county's historic survey puts Bealsville around Horton Road and State Road 60, and a homestead-sized parcel can put the house a long way from either. That changes the math. A 10-foot-wide driveway that runs 150 feet covers 1,500 sq ft, roughly two and a half typical 2-car driveways, so we price it by the square foot at $8 to $14 for 4 to 5 inches with a broom finish.

You don't have to pave all of it at once. We can pour the apron at the road and a parking pad by the house first, and quote the middle as a second phase. Mesh suits a 4 to 5 inch slab, and rebar on about a 12-inch grid suits a thicker one for a truck or trailer, per Concrete Network. Our driveway page and the Plant City driveway cost guide show how thickness and tear-out change the price.

Level compacted sand base with forms set for a concrete driveway pour in Plant City ground
Forms set over a compacted sand base before a pour.

Concrete Pricing

Our typical Bealsville ranges. Every job gets a free written estimate after we see the site.

JobPer sq ftTypical projectWhat moves the price
Concrete driveway$8 to $14$5,000 to $10,000Typical 2-car; long runs priced by the sq ft
Concrete patio$8 to $14$2,500 to $6,500Size and finish
Porch walk or sidewalk$8 to $14$1,500 to $4,500Width and length
Stamped entry or patio$14 to $24$5,000 to $16,000Pattern, color, sealer
Shop, carport or building slab$7 to $12$2,000 to $7,500Thickness, monolithic edges, plans

Ranges, not a quote. Length of run, phasing, base work and removing an old slab (tear-out adds $2 to $4 per sq ft) move the total. Free written estimate after we see the site.

Where the driveway meets a county road

Bealsville's mapped point sits outside Plant City limits on the 2020 Census map, so work here generally permits through unincorporated Hillsborough County, even with a Plant City mailing address. Read the Tax District line for your parcel on the Property Appraiser site to be sure. On county land, a driveway that ties into a county road needs a right-of-way permit from Hillsborough County Development Services, with a $50 base fee, and homeowners can apply as well as contractors.

Before we price the road end, we look at the shoulder, any ditch or culvert, and how water leaves the street side of your lot. The county sets its connection details through that permit, and we build to them. The full city-versus-county walkthrough, including the under-$7,500 exemption and when it doesn't apply, is in our driveway permit guide.

Concrete driveway apron meeting a rural road edge near Bealsville in Hillsborough County
A concrete driveway apron meeting a paved road.

What to Expect, Start to Finish

  1. Mark the well and septic

    Tell us where they are so trucks and forms stay clear.

  2. Measure the run

    We walk from the road to the house and talk through phasing.

  3. County permit

    We confirm the Tax District and line up the road connection permit.

  4. Pour, cure, clean up

    We pour early on a dry day, cure the slab and leave the yard clean.

Pads for a shop, a carport or a second home

The 1930s Federal Writers' Project described Bealsville's ground as rolling sandy loam. FDOT's soil study for the SR 60 corridor through Plant City found the sand suitable for support once the subgrade is prepared and unsuitable material removed, and our sandy-soil guide covers that prep. Under a building's floor, the Florida Building Code wants fill free of vegetation and compacted for uniform support, with clean sand fill capped at 24 inches unless approved.

A 4-inch reinforced slab for a shop, carport or prefab building runs $7 to $12 per sq ft, and a thicker or monolithic slab for a new home is priced higher. A new building also needs the code's termite protection set up before the slab is poured, while garages and unheated accessory buildings skip the 6-mil vapor sheet. A job over $2,500 needs a recorded Notice of Commencement, and over $5,000 the building department needs a copy before the first inspection, so bring any building plans to the estimate.

Porch walks, patios and the neighbors down the road

Closer to the house, a walk from the driveway to the porch or a back patio runs $8 to $14 per sq ft. A stamped entry runs $14 to $24 with the sealer, and resealing every 2 to 3 years keeps the color. On an older house, we set the new walk's height to the porch step and leave an isolation joint where they meet. A pool deck can be quoted on the same visit.

Bealsville's founders came from the communities around it, and we pour in those too: Hopewell along State Road 39 and Springhead on the county line, plus nearby Trapnell and Coronet, the old phosphate town. Walden Lake is the opposite case, a gated community inside city limits. See the whole service area for the rest.

Frequently Asked Questions

How do you price a driveway that runs a long way back from the road?
By the square foot, not the 2-car range. Our rate is $8 to $14 per sq ft for 4 to 5 inches with a broom finish, so a 10 by 150 foot run is priced on its 1,500 sq ft. Thickness for trucks and any tear-out move it from there. You get a free written estimate after we walk it.
Can part of a long Bealsville driveway stay as it is for now?
Yes. You can phase it: the apron at the road and a parking pad by the house first, the middle later. We quote each phase separately so the joints line up when the rest goes in.
Do I need to know where my well and septic are before you pour?
Yes, please, if your parcel has them. Mark what you know before the visit, and we'll plan the truck route and forms to stay off the drain field.
Can you pour the slab for a second home on family land in Bealsville?
We pour slabs for shops, carports and new buildings. A home slab is thicker or monolithic and priced above our $7 to $12 per sq ft slab range, and it follows the building's permit, plans, termite protection and inspections. Bring the plans to the estimate.
Who handles the permit for a Bealsville address?
Generally Hillsborough County, since Bealsville sits outside Plant City limits on the 2020 Census map. Confirm with the Tax District line on the Property Appraiser site. A driveway connection to a county road needs the county's right-of-way permit, $50 base fee.
Is Bealsville's sandy loam a problem for concrete?
No, if it's prepared. The water table runs shallow in much of Hillsborough County, so sand needs clearing, even compaction and good grading before a slab goes on it. We strip roots and organic soil, compact in layers, and grade so water runs off the slab and away from the house.

Request Your Free Estimate

Tell us a little about the job in Bealsville. We'll call to set a time to come measure.

No obligation. We only use your number to talk about this job.

Thank you, we have it.

We'll call shortly to set a time to measure. Prefer to talk now? Call (813) 722-1744.

Our Service Areas

Concrete work across Plant City and its neighborhoods.

Don't see your neighborhood?If you have a Plant City address, call and ask. See the full service area.

Page updated

Call NowFree Estimate